Where drain flies breed
The larvae live in the slimy film that coats the inside of waste pipes, traps and gullies. This film is a mix of soap, skin, hair, food fats and bacteria. In a pipe that runs freely and is flushed regularly, the film stays thin. Where water lingers, the layer thickens and becomes an ideal nursery.
Typical sources are a shower trap that is rarely cleaned, a little-used basin, a floor drain in a utility room or garage, and a kitchen waste pipe narrowed by grease. Outside, a gully choked with leaves can do the same job.
Can blocked drains cause flies?
Yes. A partial blockage slows the flow, so water and organic matter sit in the pipe for longer. That standing material is exactly what the larvae feed on. If flies appear alongside slow draining, gurgling or a damp smell, the blockage and the flies are likely to share a cause.
A full blockage in a chamber outside can also produce flies around the garden or patio, especially in warm weather.
When the pipe under the floor is broken
Sometimes the plughole is spotless and the flies still keep coming. That points to a source you cannot see. A cracked or disconnected pipe under a ground floor, or beneath a shower tray, lets waste water soak into the soil or the void below. The wet ground becomes a permanent breeding site, and adults find their way up through gaps around pipes, skirting boards or floor tiles.
Signs that this is happening include flies in a room with no obvious drain, a damp or musty patch near the fitting, and a sewage smell that comes and goes. A CCTV drain survey can show whether a joint has parted or a pipe has cracked, without lifting the floor first.
Why DIY remedies rarely finish the job
Boiling water, vinegar or a gel poured down the plughole can thin the film near the top of the pipe. They do not reach a sludge layer several metres down, they do nothing for a pipe leaking into the ground, and harsh chemicals can damage older plastic fittings. That is why the flies so often return within a week or two.
Getting rid of drain flies for good means removing the whole breeding layer and fixing any defect that lets waste escape.
How drain cleaning deals with drain flies
Drain cleaning for drain flies targets the full length of the affected pipe, not just the trap. High-pressure jetting scours the coating from the pipe walls and flushes the debris through to the main drain. Traps and gullies are cleaned out at the same time. If the flies persist afterwards, a camera inspection is the next step to look for a hidden leak or break.
Keeping fittings in regular use also helps. A spare bathroom or basin that is rarely run can dry out and collect film; running the tap for a minute each week keeps the seal topped up and the pipe flushed.
Need it sorted? Book drain cleaning
If flies keep coming from a drain, book drain cleaning to clear the build-up properly. Call 0333 335 7414, message 07428 535083 on WhatsApp or use the quote form and tell us which fittings are affected and how long the flies have been around.
Want a professional to handle it?
Tell George about the problem using the enquiry form below.
Frequently asked questions
Can blocked drains cause flies?
Yes. A slow or partly blocked pipe holds water and organic film for longer, which gives drain fly larvae a place to feed and grow.
Why do drain flies keep coming back after cleaning the plughole?
The breeding layer is often further down the pipe, or in wet ground beneath a broken pipe. Cleaning the plughole only removes the top of it.
Are drain flies harmful?
They do not bite or sting. They are mainly a nuisance and a sign of build-up or a leak that should be dealt with.
How do I tell which drain the flies come from?
Cover each plughole overnight with a piece of clear tape. Flies trying to emerge stick to the underside of the tape over the source.
