How a pumping station works
Waste flows by gravity into a pump chamber, a sealed tank buried in the ground. Float switches inside detect the level. When it reaches a set height, the pump starts and pushes the contents through a pressurised pipe, called a rising main, up to a point where gravity can take over again. A control panel runs the pump and usually includes a high-level alarm.
Some stations have two pumps that alternate, so one can take over if the other fails. Others have a single pump with extra storage in the chamber to buy time.
What maintenance involves
A service usually includes checking the floats move freely, testing the pumps and alarm, inspecting the non-return valves and looking at the build-up of fat, rags and silt inside the chamber. Wipes are a particular problem: they wrap around impellers and floats. Cleaning the chamber and removing debris reduces the strain on the pumps.
For businesses, keeping a record of each service helps show the system is looked after. Our commercial drainage page covers how this fits with wider drainage maintenance.
When the alarm goes off
A high-level alarm means the chamber is filling faster than the pump is emptying it, or the pump is not running at all. Reduce water use straight away: stop washing machines and dishwashers, and limit flushing. Check whether the control panel shows a fault or a tripped switch, but do not open the chamber or handle the pump yourself.
Common causes include a blocked pump, a stuck float, a tripped electrical supply, a failed pump or a blockage in the incoming drain. Each needs a different response, so tell George what the panel shows when you call.
Upstream drains and the rising main
Sometimes the station is fine and the problem is the gravity drain feeding it, or the rising main beyond it. A camera inspection of the incoming pipe shows blockages or damage, and regular drain cleaning keeps grease and silt from reaching the chamber in the first place.
Keeping the chamber healthy between services
Simple habits make a difference. Keep wipes, cotton buds and sanitary items out of every toilet that feeds the station, and scrape fat into the bin rather than the sink. Make sure everyone in the household or business knows what the alarm sounds like and what to do if it goes off.
Arranging maintenance
Have the make of pump or control panel to hand if you know it, along with how old the station is and any alarm history. Availability and scope are confirmed when you call or after a CCTV inspection, so you know exactly what will be done before any work is agreed. Call 0333 335 7414 or send an enquiry.
Frequently asked questions
How often should a pumping station be serviced?
Many manufacturers recommend at least once a year for a domestic station, and more often for commercial or heavily used ones. Follow the manufacturer's guidance for your unit.
What happens if a pumping station alarm goes off?
The chamber is filling faster than it is emptying. Cut water use, check the panel for a fault and get help. Ignoring it risks waste backing up into the property.
Why do wipes cause so much trouble in pump chambers?
They do not break down and wrap around pump impellers and float switches, stopping the pump or preventing it from switching on.
What is a rising main?
The pressurised pipe that carries waste from the pump chamber up to a point where it can flow by gravity again.
