Trueline Drainage Solutions

What Is a Gully Trap and How Do Gully Drains Work?

A gully trap is the small drain at ground level outside most houses, usually under a grid where a waste pipe or downpipe ends. It is easy to overlook until it overflows. Understanding what it is and how it connects to the rest of the drainage makes it much easier to keep it working.

Request a free quote

By sending this form you agree to our privacy policy.

TrustATrader vetted and approved5.0 rating on TrustATraderCheckatrade memberCheckatrade £1,000 guarantee (T&Cs apply)24/7 emergency calloutDomestic and commercialTrustATrader vetted and approved5.0 rating on TrustATraderCheckatrade memberCheckatrade £1,000 guarantee (T&Cs apply)24/7 emergency calloutDomestic and commercial

Written by George Piper, Trueline Drainage Solutions ·

What a gully trap is

A gully is a pot set into the ground with a grid on top and an outlet near the bottom. Inside, a bend holds water to form a seal, just like the trap under a sink. Above ground, a waste pipe from a kitchen, bathroom or washing machine discharges over or through the grid, and sometimes a rainwater downpipe does too.

Some gullies have a back inlet, where the pipe enters below the grid so it cannot splash. Others are open, with the pipe stopping just above. Either way, the gully is the point where above-ground pipework joins the underground drain.

How do gully drains work?

Water falls into the pot, passes through the trapped bend and leaves through the outlet into a pipe that runs to the nearest inspection chamber. The water left behind in the bend stops smells and insects coming back up. Because everything enters at the surface, gullies also catch leaves, grit and soil, which settle in the bottom of the pot.

What is a blocked gully?

A blocked gully is one where water cannot leave the pot fast enough. It might drain slowly, hold standing water or overflow across the patio. The cause can be leaves and silt filling the pot, grease setting in the bend, or a problem in the pipe beyond the gully. A blocked kitchen gully drain is the most common, because cooking fat cools and hardens as soon as it reaches the cold pot outside.

Why is my gully trap overflowing?

If only the gully overflows and the nearby chamber is clear, the blockage is in the pot, the bend or the short pipe to that chamber. If the chamber is full as well, the restriction is further along and the gully is just the lowest point where water can escape. Overflowing after heavy rain only can mean a downpipe is sending more water than the gully can take, or the outlet is partly silted.

What is gully cleaning?

Gully cleaning removes the debris and deposits from the pot and bend and flushes the outlet pipe so water leaves freely again. On a domestic property it often follows repeated slow draining from a kitchen gully. On commercial sites with several yard gullies, it may be part of planned maintenance. Our gully cleaning page describes the service in detail.

Keeping a gully clear

Keep the grid free of leaves, especially in autumn, and lift and rinse it now and then. Scrape fat into the bin rather than down the sink, because it is the gully outside that catches it first. If the grid is broken or missing, replace it so larger debris cannot fall in. A gully that smells but drains well may simply have lost its water seal; pour in a bucket of water to restore it.

When it is more than the gully

If a gully keeps blocking soon after cleaning, the pipe beyond it may be cracked, displaced or full of roots. A CCTV drain survey can show the condition of that short run. The guide to a blocked outside drain explains how to check chambers further along.

Need it sorted? Book gully cleaning

For an overflowing or slow gully, book gully cleaning. Call 0333 335 7414, message 07428 535083 on WhatsApp or send the quote form, and say which pipe feeds the gully and whether the nearest chamber is clear.

Want a professional to handle it?

Tell George about the problem using the enquiry form below.

Frequently asked questions

Why is my gully trap overflowing?

Either the pot, bend or short outlet pipe is blocked with leaves, silt or grease, or the drain further along is blocked and the gully is the lowest overflow point. Checking the nearest chamber tells you which.

How do gully drains work?

Water enters through the grid, passes through a water-filled bend that blocks smells and leaves through an outlet pipe to the nearest chamber.

Why does my gully smell even though it drains?

Its water seal may have evaporated or been washed out. Pouring in water usually restores it; if the smell persists, the pipe beyond may be damaged.

Can I clean a gully myself?

You can lift the grid and scoop out leaves and silt with gloves on. Hardened grease in the bend or a blockage in the outlet pipe usually needs proper equipment.

Related

Related services

Need a drainage problem sorted?

Speak to George directly for honest advice and a clear quote.

Request a free quote

By sending this form you agree to our privacy policy.

Call nowGet a quote