Private drain, lateral drain or public sewer?
In most cases in England, the pipe that serves only your property and sits within your boundary is your private drain and your responsibility. Once it leaves your boundary, or joins pipework that serves neighbours, it usually becomes a lateral drain or a shared sewer, which the local water company normally looks after. The rules have exceptions, so the guide to who is responsible for drains is worth reading.
Knowing where the blockage sits saves money. If it is in the public sewer, you should not need to pay a private contractor to clear it, and the water company will usually attend.
How we find the blockage
We lift the chambers on your property and follow the water. A full chamber with an empty one below it puts the blockage between them. If every chamber on your land is full, the problem is likely further down. A camera survey confirms the position and shows whether the pipe itself is damaged.
If a manhole on a shared run is flooded, our blocked manhole page covers what happens next.
Why sewers block
Most sewer blockages are caused by what goes in: wet wipes, sanitary products, nappies and kitchen fat that sets in the pipe. Others come from the pipe itself: tree roots through joints, a cracked or displaced section, or a sag where waste settles. A sewer pipe under the house is harder to reach, so access points and chambers matter a great deal.
Keeping a sewer flowing
Bin wipes, sanitary products and cotton buds rather than flushing them, and let cooking fat cool and go in the food waste. If your property has had more than one sewer blockage in a year, a camera survey is usually a better use of money than another clearance, because it shows whether the pipe itself is causing the trouble.
What to do when the sewer is blocked
Stop using toilets, sinks and appliances if you can, because everything you send down will back up at the lowest point. Keep children and pets away from any overflow. If sewage is coming up inside or the problem seems to be on a shared run, ring us on 0333 335 7414 and we can tell you whether to call your water company first.
Clearing, cleaning and repairing sewer pipes
On private sections we clear the blockage with rods or jetting, then jet the run to remove grease and scale. If the camera shows cracks, roots or a collapse, we explain whether sewer pipe repair is needed and which method suits the pipe. Cost depends on access, the length and depth of the pipe and how severe the blockage is, so we give a quote once we know where it is.
Frequently asked questions
Why is my sewer blocked?
Usually because wipes, sanitary items or fat have built up in the pipe. Roots, cracks and sagging sections can also catch waste and cause blockages.
Why does my sewer pipe keep blocking?
Frequent blockages usually point to damage, such as roots, a displaced joint or a dip in the pipe. A camera survey shows which, so the right repair can be planned.
What should I do when the sewer is blocked?
Stop using water, keep away from any sewage, and check whether chambers on your property are full. Then call us or, for a shared sewer, your water company.
Will the water company clear my blocked sewer?
In most cases they clear public sewers and lateral drains outside your boundary. Private drains inside your boundary are usually the owner's responsibility.
