Why systems get replaced
Older septic tanks may be cracked, undersized for a house that has been extended, or discharging somewhere that is no longer allowed. Some were built from brick or concrete chambers that have deteriorated. Others work, but their drainage field has failed beyond repair. A camera inspection of the pipes and a look at the tank and outlet usually show whether repair or replacement makes more sense.
Septic tank or sewage treatment plant?
A septic tank relies on settlement: solids sink, and partly treated liquid flows to a drainage field where the soil finishes the job. A sewage treatment plant adds air, usually with a small electric pump or blower, so bacteria break down waste much more thoroughly. The water leaving a treatment plant is cleaner.
That difference matters for where the water can go. In most cases a septic tank should discharge to a drainage field in the ground, while a treatment plant may be suitable for discharge to a watercourse, subject to the rules. Treatment plants need a power supply and regular servicing; septic tanks are simpler but need suitable ground.
The general binding rules
In England, small domestic sewage discharges are covered by what are known as the general binding rules. Broadly, if your system meets them, you may not need an environmental permit; if it does not, you may need one or need to change the system. The rules cover things such as the volume discharged, the type of unit, how close you are to sensitive areas and whether a mains sewer is nearby.
Because they change and depend on location, check the current Environment Agency guidance for your property. Building control approval is also usually required for a new system or a replacement.
Ground and position
A drainage field only works if the soil can absorb water at a reasonable rate, which is tested with a percolation test. The unit itself needs access for emptying and should sit a sensible distance from the house, wells, boundaries and watercourses. Levels matter too: if the house drains cannot fall to the unit by gravity, a pump may be needed.
Connecting it up
New pipework from the house to the unit, and from the unit to its outlet, needs laying to the correct fall with access points for future clearing. Our new drain installation page covers how new runs are planned. For an existing system that is struggling rather than failing, see cesspit and septic tank drainage.
Talking it through
Have any details of the existing system to hand: its age, type, where it discharges and when it was last emptied. Availability and scope are confirmed when you call or after a CCTV inspection, so you know exactly what will be done before any work is agreed. Ring 0333 335 7414 or request a quote.
Frequently asked questions
Do I need permission to install a septic tank?
Building control approval is usually needed, and depending on the general binding rules you may also need an environmental permit. Check current Environment Agency guidance for your site.
Septic tank or treatment plant: which do I need?
It depends on where the treated water can go and what the ground is like. A septic tank generally needs a drainage field; a treatment plant gives cleaner discharge and may suit other outlets.
Can my old septic tank still discharge into a ditch?
In most cases, a septic tank discharging directly to a watercourse no longer meets the rules and needs upgrading or replacing. Check the guidance for your situation.
Does a treatment plant need electricity?
Yes. Most use a pump or blower to add air, so they need a power supply and regular servicing to keep working properly.
