When root removal is needed
Root problems usually show up as repeated blockages on the same run, slow drainage near trees or hedges and chambers that fill after heavy use. A camera shows fine roots hanging through joints or a dense mass filling the pipe. The guide to tree roots in drains explains why roots enter pipes in the first place.
How roots are removed from a drain
The method depends on the pipe and how much root is present. Small roots can sometimes be cleared with high-pressure jetting. Larger growth usually needs a cutting head on a drain machine or a jetting nozzle designed for root cutting, worked carefully along the pipe.
Old clay pipes need extra care. If the camera shows cracked or displaced sections, we cut gently to avoid making the damage worse. Once the roots are out, we flush the pipe and run the camera through again to record its condition.
Trees, hedges and new planting
Willow, poplar and other thirsty species are well known for seeking out drains, but almost any tree or large shrub close to a leaking joint can cause trouble. If you are planting near a drain run, a trace first shows where the pipe lies so you can keep new trees at a sensible distance.
Why roots grow back
Cutting removes the roots inside the pipe, but the tree is still nearby and the gap that let them in is still open. In many cases roots return within months. That is why the camera survey after cutting matters: it shows exactly where the roots entered and whether the joints or pipe need repair.
Repairs after root cutting
If roots came through one joint, a drain patch repair can seal that section from inside. If they entered at several points, full-length drain relining may be better, as it creates a smooth pipe without joints for roots to exploit. Where the pipe has collapsed or been pushed out of line, excavation may be needed. We explain what the footage shows and let you choose.
Root removal on sewer pipes
Roots can also get into shared and public sewers. If the problem is outside your boundary or on a shared run, it is likely to be the water company's responsibility. We can show you the footage so you can report it. On private pipework, cost depends on the amount of root, the pipe length and access, plus whatever repair the survey shows is needed.
Frequently asked questions
How are roots removed from a drain?
With a cutting head on a drain machine or a root-cutting jet nozzle. The method is chosen after a camera survey shows the pipe material, condition and amount of root.
Will roots grow back after cutting?
Often, if the gap they came through is left open. Sealing the joint with a patch repair or relining the pipe makes regrowth much less likely.
Can root cutting damage my drain?
It can if a fragile pipe is worked too hard, which is why we survey first and cut carefully on cracked or old clay sections.
Should I remove the tree to stop roots in my drain?
Not always. Sealing the pipe usually solves the problem without removing a tree. Check any tree protection rules before felling.
