
Cleaning the pipe, rather than just opening a hole
Jetting sends water through a hose and nozzle inside the drain. The jets loosen material from the walls and carry it along the pipe. Our high-pressure water jetting service cleans grease, scale and silt from the full bore, so the aim is a clean passage rather than a narrow opening through the obstruction.
Rodding can suit a reachable soft blockage near a chamber. It does not necessarily remove deposits further along, particularly grease stuck to the sides. Choosing jetting is therefore about the condition of the run and the material inside it. A simpler method may be sufficient for one problem; for another, leaving deposits behind means waste soon catches again.
The details that change the amount of work
Chamber access is a useful starting point. Covers must be reachable, and there needs to be room to work around them. A clear path to an accessible chamber is different from a cover hidden beneath stored items or paving. Tell us about restricted passages, locked gates and anything preventing access, rather than assuming the equipment can reach every part of the property.
Length and diameter matter because they determine how much pipe needs cleaning. Several branches may require separate attention, even when only one fitting is showing symptoms. A quote for the affected kitchen run is not necessarily a quote for every drain on the premises. Ask which lengths are included and whether the work is clearance, cleaning or both.
What is inside makes a difference too. Loose silt, hardened scale and layers of fat behave differently. Roots may indicate an open joint that needs repair as well as clearance. A domestic kitchen and a busy food business can have very different patterns of use, so describe the activities feeding the drain, not just the size of the building.
When looking inside is worth doing
A CCTV drain survey can separate a dirty pipe from a damaged one. If the camera can pass, inspecting before cleaning may help identify the restriction. Where standing waste prevents a useful view, clearance may come first and the inspection follow. The sensible order depends on access and what can actually be seen.
After cleaning, footage can show a crack, a displaced joint or a low section where waste collects. That finding changes the next decision: further cleaning will not mend broken pipework. For a drain that repeatedly blocks, understanding the cause can avoid paying for the same temporary solution again. Our drain unblocking cost guide considers clearance more broadly.
Kitchen maintenance and a one-off blockage
A one-off visit deals with an existing problem. Planned cleaning considers how deposits build up during normal use. For commercial drainage, particularly kitchens handling fat and food waste, the useful question is how the drain is behaving between cleans. The interval depends on usage, deposits found and previous blockages, not a universal calendar.
If cleaning uncovers a fault
Cracks or displaced joints can trap waste even after cleaning. George can explain suitable remedial work against the camera findings. Agree the repair separately from clearance, with its scope tied to the defect rather than another clean of the same pipe.
Give us a clear picture before the visit
Call 0333 335 7414 or message 07428 535083 on WhatsApp with the affected fittings, how long the problem has lasted and whether the chamber or gully overflows. Mention previous jetting and any survey footage. Photos taken safely from ground level can help explain access; there is no need to lift a heavy cover to make an enquiry.
Ask what the proposed work includes and how any additional inspection or repair would be agreed. You can also send an enquiry with these details. Trueline Drainage Solutions handles domestic and commercial drains, with remedial work aimed at the reason they are failing rather than repeated clearance alone.
Want a professional to handle it?
Tell George about the problem using the enquiry form below.
Frequently asked questions
Is jetting more expensive than rodding?
The cost depends on the job and the cleaning required. Rodding may be enough for a reachable soft obstruction, while jetting removes deposits over a longer section. Compare the work included, not just the method's name.
Can jetting damage an old clay pipe?
An old pipe needs its condition considered before cleaning. Cracks and loose joints can affect the approach. Tell George about previous damage or footage so the method can be assessed against the pipe, rather than its age alone.
Do I need a camera survey as well as jetting?
Not for every clearance. It becomes particularly useful when blockages return or there are signs of damage. The drain may need opening first so the camera can obtain a clear view.
How often should a restaurant drain be jetted?
That depends on kitchen use, grease build-up, the drain layout and its blockage history. Discuss those factors when arranging maintenance rather than assuming every restaurant needs the same interval.
Will you tell me the price before starting?
Discuss the proposed work and quote with George before agreeing to it. If inspection reveals a separate repair, ask for the options and their scope before authorising that work.
